Used EBARA A150W-T #196521 for sale

EBARA A150W-T is a pump designed by EBARA for medium flow rate applications. It uses the radial split casing centrifugal pump design, which allows for reduced hydraulic losses and improved controlling of the pump's flow output. This pump is available in cast iron or stainless steel construction and can be used for both hot and cold water applications. The pump body and internal components are covered with an epoxy paint finish for enhanced corrosion protection. EBARA A150WT is primarily operated in medium flow rates and has a maximum flow rate of 150 gallons per minute (GPM). It has a maximum head of 50 feet when operating at 141 GPM, and a maximum rotational speed of 1440 revolutions per minute (RPM) when operating at full flow. It has a maximum operating pressure rating of 125 psi (8.6 bars) when operating at 150 GPM. It has an impeller diameter of 6.25 inches and can support a maximum operating temperature of up to 140°F (60°C). A 150 W-T has a motorsized design with NEMA 56C electric motor frame with a rated output power of 2 HP (1.5kW). It is designed to operate at an operating voltage of 230 volts and currently runs on a frequency of 60 Hz It has a power factor of 0.88 and an efficiency rating of 83%, which makes it more energy efficient. A150WT also has a shaft seal to protect against leakage issues. It uses a single mechanical type, cartridge type, double mechanical type or apex type seal depending on the application. The pump also has an oil level indicator attached to monitor the oil level in the pump housing. It also has a foot support on the body which allows the pump to be supported while in operation. EBARA A 150 W-T has a warranty of one year and comes in various sizes and configurations to meet the unique requirements of the customer. It is compliant with the applicable ISO (International Organization for Standardization) international standards and is certified by the CSA ( Canadian Standards Association). It also meets the standards set by the American National Standards Institute (ANSI) and Underwriters Laboratories (UL), making it a safe and reliable choice for different applications.