Used EBARA A30W-N #293664740 for sale

EBARA A30W-N is a stainless steel vertical multistage, centrifugal pump designed for various residential, commercial, and industrial applications. It operates efficiently and reliably with a continuous and quiet operation that is ideal for applications requiring a constant low-pressure and low-flow rate. A30W-N consists of an impeller, three stage bearing assembly, and a hydraulic shaft seal. The impeller design and materials used are specifically designed to reduce cavitation and to increase the pump efficiency. The three-stage bearing assembly ensures better protection from wear and tear. It also ensures that the pump runs smoothly and efficiently. The hydraulic shaft seal assists with the protection of the inner workings of the pump from outside contamination. In terms of operational performance, EBARA A30W-N is designed for continuous operation under extreme pressure up to 180 psi (12.4 bar). It can handle temperatures up to 149°F (65°C). It is also designed for a variety of liquids including water, sea water, and some lower viscosity oils. It is also corrosion-resistant due to its stainless steel construction and can handle gas and other hazardous materials with proper protection. A30W-N measures 10.9" x 10.24" (277 x 260 mm) and weighs 29.4 lbs (13.4 kg). It is a submersible pump and can be installed up to 16' (5 m) below the liquid surface. It has a maximum flow rate of 20 gpm (76 lpm) and a 1" BSP Suction/Discharge port size. The pump is also designed with EBARA auto-cut switch which prevents motor burn-out due to a dry run. In terms of maintenance, EBARA A30W-N is a low maintenance pump that requires occasional inspection in order to verify the operation status. Regular cleaning of foreign particles and debris is recommended; however, the impellers are designed to reduce the amount of fouling. Overall, A30W-N is a versatile, high-efficiency, low-maintenance pump that is suitable for a variety of applications. It has a maximum flow rate of 20 gpm (76 lpm) and a continuous operation pressure up to 180 psi (12.4 bar). Its stainless steel construction ensures long-term durability and corrosion resistance.