Used EBARA AA10S #9216952 for sale

EBARA AA10S is a single stage end suction centrifugal pump designed to deliver clean and non-aggressive liquids at up to 10m3/h flows and heads up to 55m. It's designed for both industrial and public water supply applications as well as fire fighting applications. It has a cast iron body, construction with pump cover, impeller and components all made of stainless steel AISI 304 / 316 housing the mechanical seal and the shaft. The pump comes pre-fitted with an electric motor and is designed for horizontal mounting. AA10S can be used with a wide range of liquid baths including sea water, clear water, and ground and surface water. It is designed for reliability and longevity, due to its robust construction and simple design. The motor is single phase or three phase with maximum power ratings of 2,2kw to 4kw depending on the model and connection type, with maximum flow of up to 10m3/h and maximum heads of 55m. EBARA AA10 uses the single stage centrifugal design to create a flow by transferring the power of the motor to the rotation of the impeller. The impeller draws the liquid in with velocity and centrifugal force and then pushes it out at an increased pressure, creating an increase in pressure of the liquid and resulting in an increase in flow rate. The pumps are also provided with a recessed impeller for solids handling up to 19mm size. The hydraulics of EBARA AA10S are designed to be extremely efficient and to minimize noise levels during operation with an optimized volute casing to reduce turbulence and cavitation. It also uses a standard NEMA flange connection to ensure tight connections and to reduce running loads. The maximum operating temperature depends on the particular model, with the standard being 40C and the higher temperature models being able to handle up to 65C. The pump is also equipped with mechanical seals that are designed to prevent leakage and have superior resistance against no volatile liquid temperature changes. Overall, AA10S is a reliable and robust pump that is easy to install and can be used in a wide range of industrial and fire fighting applications. It comes with a range of features including a pre-fitted electric motor, efficient hydraulics, recessed impellers and mechanical seals that ensure reliability and longevity. EBARA AA10S can handle up to 10m3/h flow rates and heads up to 55m.