Used EBARA AA40W #9372062 for sale

EBARA AA40W is an end suction close coupled, single stage centrifugal pump used for the transfer and circulation of clean liquid in a wide range of applications. This pump is suitable for use in residential, industrial and commercial water transfer applications with varying media up to 120°F (49°C). It is a versatile pump that can be used in series or parallel to address low or high flow needs. EBARA AA 40 W is designed and manufactured with an enclosed impeller and a back pull-out design for easy maintenance and installation. Its construction consists of a cast iron body with bronze impeller and motor mounts, and a corrosion resistant, stainless steel shaft and shaft sleeves. Its casing, impeller, motor frame and support brackets are all made from 304 stainless steel. The pump also has self-lubricating double radial seals and a mechanical seal for both dry and wet running conditions. It is an energy efficient pump, comprising of a range of high efficiency electric motors. AA40W has an axial suction port and radial horizontal delivery port which rotate in a clockwise direction when viewed from the motor side. It has a built-in self-venting system which reduces the formation of vapors within the pump, displacing it with air when it reaches the correct pressure. The design of AA 40 W also eliminates damage to the internal parts from dry running. EBARA AA40W has a maximum suction lift capacity of approximately 25 feet (7.6 m), with a capacity of up to 50 gallons per minute (4.7 m³/h) and up to a maximum head of 125 feet (38 m). The maximum operating pressure for this pump is 55 PSI (3.78 bar). The pump is also equipped with a stainless release valve, which allows for pressure release and protection of the pump from excessive pressure. EBARA AA 40 W is an easy to install and maintain pump that offers cost-effective performance as well as reliability and durability. It is suitable for a wide range of applications, such as circulating, cooling, and transfer of liquids in plumbing, cooling, and HVAC systems. This pump is also available in three different motor sizes - 0.4hp (0.3kW), 0.75hp (0.56kW), and 1hp (0.75kW).