Used ELECTROVERT / SPEEDLINE OmniFlow Excel 10 #9039486 for sale

ELECTROVERT / SPEEDLINE OmniFlow Excel 10 is a reflow oven designed for use in circuit board assembly. The oven utilizes convective heating to evenly heat the board assembly and is an ENERGY STAR approved device. The oven, when powered up, works according to a user-set heating profile. The user creates a profile with preconfigured programmable dry times, soak temperatures, static reflow temperatures, cool down temperatures and times, and zones. The heat profile is then used by the oven to uniformly reflow solder paste on the board. The oven can be set for all the same parameters as typical industrial ovens but is more compact and easier to use. SPEEDLINE OmniFlow Excel 10 has a 9.9 cubic feet (280 liters) interior and a conveyor speed of up to 8 inches (200 mm) per minute. It comes equipped with an operator control panel with 32 character display and keypad, full diagnostic capability, forced air convection heating system, two melt zones, and up to eight heating zones. The oven takes up only 6ft 6in of floor space and can easily fit into a typical laboratory or production environment. The oven comes with a 600 watt heating element which efficiently heats the components and board to the desired temperatures. The conveyor belt is made from stainless steel and has adjustable height and speed and a moveable bypass circuit for inspection of samples. The oven is equipped with a number of safety features such as over-temperature detection, over-voltage and low pressure shut-off, temperature and pressure sensors, and an automatic temperature control system. All of these features help ensure that components and boards are not damaged during the reflow process. ELECTROVERT OmniFlow Excel 10 is a reliable solution for reflowing solder paste and other components in circuit board assembly. With its user-friendly features, efficient heating capability, and adjustable settings, it is an ideal solution for anyone who needs a reliable and precise reflow oven.