Used ERSA Hotflow 3/20 #9357583 for sale

Reflow oven Type: RAL7016/7035 Pneumatics: Inlet pressure: 6 Bar (min) Air consumption: 5 m³/h Connection: Hose NW 8 Inert gas technology (Nitrogen): Inlet pressure: 8 Bar Inert gas supply to soldering zone Degree of purity: 5.0 Nitrogen consumption: 0-35 m³/h Connection: Hose NW 8 Extraction output: (2) Extraction connectors ⌀, 150mm Overall extraction level: 800 m³/h Extraction level each connector: 400 m³/h Ambient conditions: Ambient temperature: 10-35°C Air humidity: 20-95% Continuous sound level: < 70 dB (A) Safety devices: Lockable main switch (4) Emergency-Stop switches Fan monitoring module Extraction monitoring extraction output Hood: Release with software/trigger with switch Connection data: Mains voltage: (3) 30/400 V, N, PE 5-conductor mains Voltage tolerance: +/-10% Frequency: 50/60Hz Back-up fuse: 3x100A (Slow-blow) Power consumption: 55-104 kW Power consumption (reduced): 55 kW Heating system: Convection proportion: 100% Circulatory each module: 500 m³ (adjustable) Convection heating modules: 10 x upper 3 x lower or 10x lower Pre-heating modules: 7 x lower Heating modules soldering zone: 3 x upper, 3 x lower Power consumption each pre-heating module: 3.3 kW/400V Power consumption each soldering module: 3.3 kW (4,5 kW(1))/400V Heating-up time of soldering system: 20-30 min Minimum temperature of first pre-heating zone: 90°C Cooling system: ERSA Cooling system with water chiller Cooling modules: 4 x lower Temperature control: Inside cooling zone 1 Cooling medium inside cooling circuit: Water-antifreeze Cooling medium inside cooling aggregate: R407C Cooling medium inside process chamber: Air Single-conveyor system: Working width: 60-545 mm Height of passage, standard: +25 to -35 mm Height of passage, with center support: +25 to -15 mm Conveyor speed: 20-200 cm/min Transport height above floor: 820-950 mm Pin chain conveyor: 3 mm rim support Minimum PCB length: 80mm 2011 vintage.