Used HELLER 1913 MK III #9165227 for sale

Name: HELLER 1913 MK III
Brand: HELLER
SKU: 9165227
Availability: SoldOut

It looks like this item has already been sold. Check similar products below or contact us and our experienced team will find it for you.

Tap to zoom

Sold

Reflow Ovens

Manufacturer

HELLER

Model

1913 MK III

ID: 9165227

Reflow ovens Inert atmosphere: Minimum PPM Oxygen: 10-25 PPM Nitrogen cooling: Yes Waterless cooling with flux separation system: No Nitrogen On / Off valve: No Oxygen monitoring system: No Nitrogen standby system: No Sample port in reflow: Yes Typical nitrogen consumption: 500 - 700 SCFH Computer control: AMD or Intel based computer: Yes Recipe storage: >500 Flat screen monitor: Yes OS: Windows XP Monitor mount: Yes Auto start software: Yes Data logging: Yes Password protection: Yes LAN Networking: No Mesh belt conveyor: Height from floor: 35.5" + 2.0" (90 cm + 5 cm) Maximum PCB width: 10" (25 cm) 15" (38 cm) 18" (46cm) 20" (50.8 cm) 24" (61 cm) (Requires 30” heater modules) Conveyor length On / Off load: 6" (15 cm) Heated tunnel length: 140" (355.6 cm) Process clearance above mesh belt: 2.3" (5.8 cm) Mesh belt pitch: 0.5" (1.27 cm) Maximum conveyor speed: 74"/Min (188 cm/min.) Conveyor direction left to right: Yes Conveyor direction right to left: No Conveyor speed control type: Closed loop Edge hold conveyor system option: Height from floor: 37.0" + 2.0" (94 cm + 5 cm) Clearance conveyor pins: 1.15" (2.9 cm) (top and bottom) Length of PCB support pins: 187" (4.75 mm) 3 mm Long support pins: No Minimum / Maximum board width: 2.0" - 18" (5 – 45.7 cm) 22” (55.8 cm) (Requires 30” heater modules) Power width adjustment: Yes Computer controlled width adjust: No Auto lubrication system: Yes Forced convection zones: (13) Zones (top and bottom) Heater type: Instant response open coil Heater material: Nichrome Profile change time: 5 - 15 minutes Temperature control: Accuracy of temperature controller: ±.1°C Cross-belt temperature tolerance: ±3.0°C Heater wattage per zone: 6000 W Temperature range standard: 25-350°C High temperature up to 400°C: No High temperature up to 450°C: No Insulation type: Calcium silicate UV Cure: No Cooling systems: (4) Standard cooling zones Additional cooling zone (External): No Water cooling: No Waterless cooling: No 2013 vintage.

Read More Close

HELLER 1913 MK III is a reflow oven designed to meet the highest needs in the electronics industry. Specifically, this oven is intended for large-scale production as it features an advanced convection equipment for uniform heating of the board and heaters positioned along the top, bottom, and sides of the oven for optimal board heating. Its modular design allows for easy installation and an increase in production capacity. The oven has a temperature range of 50° to 300°C, and is fitted with a PID temperature controller to ensure that the desired temperature is maintained throughout the entire reflow cycle. Additionally, this model features an embedded pulse-width modulation (PWM) output for precise temperature control. HELLER 1913MKIII is designed with a hot-air convection system which ensures a uniform heating of the board, resulting in superior and consistent thermal profiles. The oven has an intelligent cooling unit, with a powerful extractor fan and large vents for efficient convective cooling and noise reduction. The oven's chamber is lined with non-stick, high-temperature insulation material for minimized retained heat, promoting energy efficiency. Its internal components are constructed with rust-resistant and heat-resistant materials to guarantee long-term operation. To protect the components and ensure safety, this model is designed with a spreader board machine which prevents the board from making contact with the hot surface of the oven. Furthermore, its safety tool features an over-temperature protection, an active pressure equalizing asset, and failsafe alarms. 1913 MKIII comes with an intuitive, user-friendly touch-screen interface with multi-language support, enabling users to control the oven's settings and parameters from anywhere. This oven also features a powerful data logging model which enables users to track and store temperature and time data. In conclusion, 1913MKIII is an advanced reflow oven which is well-equipped to meet the requirements of the electronics industry. It is flexible, energy-efficient, and designed with a range of safety features for a reliable operation.