Used VARIOUS Lot of spare parts #9259943 for sale

Qty / Description EASY BRAID Spare parts (6) / DEK 265 Stencil rolls (5) / Desoldering tips, 1.1 mm (13) / Desoldering tips, 1.35 mm (4) / Desoldering tips, 1.15 mm (40) / Chisels 30", 2.5 mm, 600 deg (25) / Chisels 30", 1.78 mm (91) / Chisels 30", 1.0 mm, 600 deg (40) / Conical sharps, 0.4 mm, 600 deg (41) / Bent sharps, 30," 0.4 mm (3) / Desoldering tips, 0.80 mm (13) / Desoldering tips, 1.1 mm (4) / Desoldering tips, 1.35 mm (12) / Bent sharps, 30", 0.4 mm (16) / Conical, 0.40 mm (50) / Chisel bents, 30", 1.78 mm (40) / Chisels, 30", 2.5 mm (44) / Chisels, 30", 1.78 mm (5) / Chisels, 30", 1.0 mm (.04) (138) / Chisel extra larges, 5.0 mm (30) / Conical sharps, 0.4 mm (4) / Conical sharps, 0.4 mm, 700 deg (10) / Conical sharps, 1.0 mm (14) / Knifes, 4.83 mm (4) / Blade tips, 10.41 mm (15) / Blade tips, 22.1 mm 700 deg (10) / Chisel long reaches, 60", 1.78 mm (11) / Conical bents, 30" fine (36) / Bent sharps, 30", 0.4 mm (4) / Bent sharps, 30", 0.5 mm (3) / Tweezers cartridge pair (6) / Chisels, 30", 2.5 mm (16) / Chisel bents, 30", 1.78 mm (20) / Chisel bents, 30", 1.5 mm (12) / Conical sharps, 1.0 mm, 800 deg (5) / Bent sharps, 0.4 mm, 800 deg (20) / Filter tools (18) / Chisels, 30", 1.5 mm (21) / Chisels, 30", 2.5 mm (13) / Bent sharps, 30", 0.51 mm (20) / OS-A-10 AS (20) / OS-B-10 AS (20) / OS-C-10 AS (5) / OS-C-50 (30) / Wick quick braids, 0.025 (15) / Q-B-5AS Wicks (5) / Wick sea braids, 0.075 (25) / Wick sea braids, 0.100 (5) / Wick sea braids, 0.125 PACE Spare parts (1) / Tool, cleaning, sponge (1) / Holder, thermocouple (5) / Button, hand pieces (3) / SX-80 Door assembly (1) / TIP, Conductweez (12) / TIP, Resistweez, flats (5) / TIP, Sx, super, 0.030 Id (50) / TIP, Sx, micro, 0.040 Id (6) / Cup,Vacuums (17) / Cup,Vacuums (16) / Cup,Vacuums (1) / TIP, TT, 0.27 x 0.27, PLCC20, PR, P1 (2) / TIP, 0.57 x 0.57, PLCC44, TT, PR, P1 (1) / TIP, TT, 0.86 x 0.86, PLCC68, PR, P1 (2) / TIP, PQFP 100 Pins (1) / TIP, DBL, 0.17, BENT, SOIC, TJ, P1 (6) / TIP, 1/8 Shanks (1) / TIP, SX-70, 3/16 SHK, 0.0400 Id (9) / TIP, PQFP 160 Pins (2) / 1121-0363 P5 (1) / TIP Assy, single, STR, TJ (4) / TIP, Flat ends, 0.24 x 0.074, TJ, P1 (2) / TIP, 0.26 x 0.26, TT, PR (2) / TIP, 0.28 x 0.28, TT, PR (2) / TIP, TT, .40 X .35, PR (1) / TIP, 0.35 x 0.25, LCCC24, TT, PR, P1 (2) / TIP, 0.85 x 0.85, LCCC132, TT, PR, P1 (2) / TIP, SX70, LL, FLO-D-SODR (1) / TIP, IR, 3/16S, 3/32CH, EXT, PK5 (1) / TIP, TT, 3/16SK, 0.66 x 0.90 (2) / TIP, IR, 3/16, MW, H CH, BNT, P5 (1) / TIP, PIK, 0.322 SQ, TQFP-28, P1 (2) / TIP, PIK, 0.520 SQ, TQFP-80, P1 (2) / TIP, PIK, 0.604SQ, QFP80/100, P1 (2) / TIP, TB Combo 0.03 x 0.11 and 0.10D, P1 (1) / PIK-TIP, 0.66" x 0.90", QFP 80/100 (1) / PIK-TIP, 0.85" x 0.85", QFP 144 (2) / Angled mini waves (15) / TIP, End, TH.DR, 0.030 Id (1) / TIP, End, T.DR, 0.090 Id (3) / TIP, EXT RCH, T.DR, 0.040 Id (1) / TIP, EXT RCH, T.DR, 0.060 Id (1) / 1 / 16" Chisel TIP long reach (1) / TIP, End, Prec, 0.040 Id (4) / TIP, End, Prec, 0.020 Id (2) / TIP, IR 1/64, Sharps (2) / Endura Thermomax TIP 0.031 Id (1) / SX-90, TD F, LTHD, 0.05 x 0.09 Id A06 (2) / SX-90, EXT TD, 0.03" x 0.09" (1) / 1121-0939 P5 (1) / SX-90 Precision, 0.02" x 0.07" (2) / SX-90 Precision, 0.04" x 0.09" (2) / SX-90 FLO-D-SODR, 0.06" x 0.188" (1) / SX-90 TD TIP, 0.16" x 0.2" (3) / 3/128" Conical (1) / 13/64" Chisel (14) / 5/64" Bevels 60 deg (8) / 1/64" Conicals, sharp, bent (29) / 3/64" Chisels, bent 30 deg (14) / 1/16" Chisels 60 deg (5) / 1/32" Conicals sharp extended (6) / 1/8" Chisels extended 90 deg (5) / 3/64" Chisels, bent 30 deg (1) / Mini wave (12) / Single sided chisels (13) / Angled mini waves, 2.4 mm (3) / 1/128" Conicals (2) / 1/4 Flat blades (1) / TIP, Single sided chisel (15) / TIP, Angled mini-waves FP (1) / Micro wave TIP (1) / Mini wave (1) / Blade, 10.8 mm (3) / Blades, 21.2 mm (1) / SOIC 14/16 (1) / Chip 0402 1.0 mm (4) / SOT 23 1.8 mm (4) / TIP, THC, SOT 89 (2) / Chips 1206, 1210 (9) / TIP, THC, Blades 0.263 (1) / 2 mm Wide (11) / Conical extended bents, 0.016 (7) / Chisel standards, 0.031 (5) / TIP Chisel standards, 0.062 (2) / Chisel standards, 0.205 (1) / TIP Knife, 45 deg, STD 0.118 (1) / Single sided chisel TIP (9) / WJS HP TIP 1/64 (6) / WJS HP TIP 1/64", 30 deg (9) / WJS HP TIP 3/64", 30 deg (6) / WJS HP TIP 1/31" (3) / WJS HP TIP 3/32" (8) / WJS HP TIP 1/16", 30 deg (6) / WJS HP TIP Miniwaves (2) / WJS HP TIP 0.0625" Chisels (2) / WJS HP TIP 0.125" Chisels (3) / WJS HP TIP 0.1875" Chisels (2) / WJS HP TIP 0.25" Chisels (4) / 1/32" Chisels, 30 deg (1) / Miniwave, 3.05 mm (3) / Angled miniwaves, 3.05 mm (4) / 1/4" Flat blade, accudrives (2) / 1/64" Conical sharp bents (2) / 1/16" Chisels, 30 deg (1) / Miniwave (4) / Chisel, accudrives, 0.1875" (1) / TW 100 Instscal module (1) / Powermodule, intelli heat (9) / Seals, rear (2) / Washers, heater extract (19) / SX-80 Rear seals (5) / O-Rings (10) / SX-80 Spring long sides (8) / SX-80 Spring short sides (1) / Stand, chart holder (7) / Disconnect, quick fem, hose (2) / Fitting, bulkhead, 1/8 Pin NPT (8) / SX-80 Plunger shafts (3) / Replaced 1265-0009 (5) / Glass chambers, micro W/Cont (2) / Visifilters, element (2) / PAD, GRIP, TT, Pair (1) / Support, tool base (1) / Holder, tube/wire, GRY (11) / Tubings, PVC, clear, 0.125 Id ,6FTA (1) / Power cord, detachable (1) / Tubing, SIL, Trans, 0.125 Id, 66 (2) / SX-80 C Clips (3) / Screw sets 6-32 x 0.187, P5 (1) / Screw set 8-32 x 1/8, PK 10 (2) / ENDURA TIP adapt TIP (1) / Sponge, hot cubby (15) / Sponges, clean station (5) / Sponges, stand, TIP and tool (1) / Nozzle straight jet, 5 mm (3) / Nozzles soic-8 (1) / TF 2000 Nozzle 35 mm (1) / Nozzle, 7.3 mm x 7 mm (1) / TIP, Thermo part removal (1) / Assembly, edge connection clamp (1) / Heater, IR-70 (3) / SX-80 Handle assembly (2) / HTD-100 Hand piece (2) / PS-90 Hand piece (2) / TD 100 (1) / Cubby kit, SMR (2) / Kit, redi-rak, hand piece (3) / 6019-0056-P1 Obsoletes (1) / TD 100 Tool stand (1) / Cleaning station, SMT, PK1 (6) / Kits, visifilter replace, MP-1A (1) / Kit, Vacuum cup, PIK-VAC,P1 (1) / TP-65 Kit (2) / SX-80 F/S Trap cubby kits (3) / MT-100 Tweezer with cubby kits (2) / TJ-80 (2) / PS-90 Hand piece intelliheats (2) / TT-65 KIT Blue series (1) / MBT 350 Adapter cable (13) / Power cord, univ, male/female (1) / ST30, W/TD 100, 120V (1) / WJS-100 Soldering system (3) / 1.75" Static safe metal flexs (17) / FX-200 Pre filters (2) / FX-50 Replacement filters (2) / General filters (1) / Adhesive filter cartridge (1) / A-500 Filter, carbon (1) / Metal fumeflow worktable Qty / P/N (1) / 1121-0314-P1 (11) / 1121-0341-P5 (19) / 1121-0405-P1 (8) / 1121-0421-P1 (1) / 1121-0423-P1 (2) / 1121-0425-P1 (1) / 1121-0427-P1 (1) / 1121-0431-P1 (3) / 1121-0432-P1 (4) / 1121-0443 P1 (2) / 1121-0446-P1 (3) / 1121-0477-P1 (1) / 1121-0491-P1 (2) / 1121-0492-P1 (2) / 1121-0508-P1 (2) / 1121-0509-P1 (2) / 1121-0511-P1 (1) / 1121-0540-P1 (1) / 1121-0545-P1 (2) / 1121-0547-P1 (1) / 1121-0549-P1 (4) / 1121-0551-P1 (3) / 1121-0553-P1 (1) / 1121-0554-P1 (5) / 1121-0557-P1 (2) / 1121-0558-P1 (10) / 1122-0004-P5 (5) / 1122-0005-P5 (1) / 1122-0008-P5 (9) / 1122-0009-P5 (4) / 1122-0011-P5 (9) / 1122-0016-P5 (9) / 1122-0019-P5 (8) / 1122-0501-P5 (1) / 1122-0502-P5 (8) / 1122-0503-P5 (12) / 1122-0505-P5 (19) / 1122-0506-P5 (1) / 1122-0508-P5 (20) / 1122-0511-P5 (3) / 1128-0056-P1 (2) / 1128-0057 (1) / 1129-0004-P10 (1) / 6019-0047-P1 (1) / 7005-0010 (2) / 8883-2111-P10.