Used SEMITOOL SAT 1060S(0A1P) #9121332 for sale

SEMITOOL SAT 1060S(0A1P) Photoresist Equipment is a chemical stripping and stripping unit used for striping and reclaiming photorecordable and photoresist slabs. The unit is designed to meet the needs of a wide variety of photomasks. The system is constructed with a stainless steel cabinet and has a 10 gallon nickel-plated tank located within for maximum heat transfer and chemical safety. The chemical tank is equipped with a temperature controlled bottom fill reservoir, a drain pump, and a recirculating heating coil. The top is also where the operator can access the solution flow rate and plate temperature controls. The unit is composed of four main parts. The pump, the heating coil, the recirculator, and the reactors. The pump is used to pump the photoresist solution to the heating coil which is in charge of heating the solution once in the tank. The recirculator is then used to circulate the heated photoresist solution before it is introduced into the reactors. The reactors are enclosed stainless steel clad vessels that house the photoresist solution while it is exposed to UV light, making it photoactive. The machine is controlled using three independent programmable controller systems. These controllers monitor and control the temperature, time, pressure, and current of the tool. It also manages the asset's cycle rate, drum speed and spooler pressure. The model is designed for safe, efficient, and environment friendly operation. Its hydrostatic chamber helps protect the photographic mask from hazardous exposures while the equipment measures and automatically adjust the temperature and pressure of the chemical bath. In addition, SEMITOOL SAT 1060S(0A1P) is equipped with chemical retaining valves and direct air injection nozzles to prevent operators from getting exposed to the chemicals being used. The unit also has two floating lids and a P-trap, allowing it to operate without needing to be constantly attended to. SEMITOOL SAT 1060S(0A1P) Photoresist System is an excellent choice for photoresist stripping and reclaiming. By combining an efficient and safe design with ample automation and chemical retention features, this unit can help any photomask factory maintain peak performance and produce high quality masks.