Used YASUI SEIKI Gravure #293648434 for sale

YASUI SEIKI Gravure is a photoresist equipment that enables the rapid production of printed circuit boards (PCB) with a non-toxic and environmentally friendly resist coating. It is designed to be used as part of a larger electroplating system for the manufacture of printed circuit boards. This photoresist unit consists of an image holding plate and a resist plate that are connected by an air gap machine. The image holding plate has a special non-toxic and environmental friendly coating that will not corrode but rather is designed to hold an etching film for stable etching. This makes it ideal for use in PCB manufacturing as it is more resistant to impacts, wear, and temperature changes than conventional photoresist systems. The resist plate on the other hand serves as a coating layer that is exposed to the etchant through a photoclip. On the resist plate, a resin is applied to protect the substrate from any damage that is caused by the etchant. This layer is then heated and cured to create the desired shape and size of the board. Theresist layer is vapor-proof and has a certain degree of flexibility, ensuring the durability of the etched circuit boards. In order to use Gravure tool, a photodefinable substrate must first be prepared. This can either be done using wafer-scale processing or printing technology. Once this is done, the image holding plate is placed above the substrate, and the resist plate is connected to the air gap asset. The film is then transferred onto the substrate and exposed to the light radiation to create the desired etch pattern. After this, the resist layer is heated and cured to form the desired board shape. YASUI SEIKI Gravure model offers a range of benefits over other photoresist systems. First, it is clean and safe to use, does not create significant environmental impact, and is designed to create powerful bond between different layers. Also, it offers faster production than conventional photoresist systems, as the etch time is significantly reduced due to the air gap equipment. Moreover, it is also more cost effective, as it requires fewer chemical and supplies. Finally, the prints are of high quality, as small details are produced with clarity and precision. In conclusion, Gravure is a photoresist system designed for the rapid production of printed circuit boards. It is safe, fast, cost-effective and creates high-quality prints. It is suitable for many PCB production needs and will make a great addition to any electroplating unit.