Used LEYBOLD HERAEUS RUVAC WSLF1001 #293624658 for sale

LEYBOLD HERAEUS RUVAC WSLF1001 is a double stage, dry running rotary vane vacuum pump with non-contact seals. It is vacuum rated up to 33.86 mbar abs and has a maximum suction capacity of 1350 cubic metres per hour (m3/h). The WSLF1001 is designed for use in a wide range of industrial and research applications including seal testing, getter pumping, molecular pumps, and leak detection. The pump is equipped with a control and display panel, allowing users to set and control suction capacity and vacuum levels. The WSLF1001 has two key components: the inlet chamber and the exhaust chamber. The inlet chamber is designed to draw atmospheric air into the pump, while the exhaust chamber is designed to exhaust the air out of the pump. The inlet and exhaust chambers are separated by a central rotor and vanes. The rotor is a grooved cylinder with smooth edges and mounted on a drive shaft. The vanes are attached to the rotor and move back and forth as the rotor rotates. This creates areas of low and high pressure inside the inlet and exhaust chambers, enabling the pump to draw in atmospheric air and exhaust it out. The WSLF1001 relies on a powerful and reliable oil-less motor to drive its operation. The motor is designed to be energy efficient and offer long-term reliability. The motor is encased in abrasion resistant cast aluminum, ensuring maximum durability and operability in all conditions. Additionally, the motor is belt driven, which provides reduced electromagnetic interference. The motor is equipped with an overload protection device that will shut down the pump if the motor becomes overloaded. The WSLF1001 is also equipped with a sliding oil control valve, allowing user to control the amount of oil used in the pump. The pump is fitted with high-efficiency non-contact seals that create a tight seal between the rotor and vanes. This reduces oil consumption, while also providing an effective seal against escape of oil and dirt. The pump also features an in-line oil separator and a coalescent filter to help ensure maximum vacuum stability. Finally, the WSLF1001 is equipped with a pressure gauge, an inlet and outlet port, and a manual reset safety system. The gauge is used to measure the vacuum pressure and the inlet and outlet ports allow the pump to be easily connected to other machines. The manual reset system will shut down the pump automatically if the pressure becomes too high, ensuring the pump runs safely and efficiently.