Used LEYBOLD HERAEUS Turbovac TMP 50 #9084333 for sale

LEYBOLD HERAEUS Turbovac TMP 50 is a top-of-the-line mechanical vacuum pump manufactured by Leybold-Heraeus GmbH. The unit is designed to handle pressures up to 35 mbar in a variety of scientific, industrial and academic applications. The pump operates on standard AC power, with a voltage range of 200 to 230 V and an operating frequency of 50/60 Hz. The unit is rated for a continuous operating duration of 1,500 hours. A square-shaped housing provides increased stability during operation, with thermally insulated cooling slots to reduce operating noise. The pump has a size of approximately 390 x 210 x 115 mm (L x W x H) and a total weight of 10 kg. It is equipped with a 40 mm diameter inlet port located at the top side of the pump and a 50 mm diameter outlet port located at the rear side of the pump. The TMP 50 is equipped with a 2.2 kW motor, which provides a direct drive to the rotor, ensuring a reliable and Economical operation. The overall compression ratio is 1.1:1, which ensures the pump can produce pressures up to 35 mbar. The relative ultimate pressure is 11 mbar and the necessary inlet pressure for optimal operation is 20 mbar. With its high suction capacity and its low power consumption, the TMP 50 offers a good cost-benefit ratio. The pump also features a built in low noise level, which is at the lowest of the value before reaching the ultimate pressure. To ensure safety, the pump has an over-temperature protection system with an automatic reset and a rear pressure exhaust valve to protect the drive system and pump motor from load and overpressure. Overall, the Leybold-Heraeus Turbovac TMP 50 is a reliable and long-lasting pumping solution for a variety of applications. With its high-performance design, low noise level, and safety features, the pump is well-suited for tasks from laboratory to industrial applications.