Used AMAT / APPLIED MATERIALS Endura II Aluminum Interconnect #9392312 for sale
It looks like this item has already been sold. Check similar products below or contact us and our experienced team will find it for you.
Tap to zoom
Sold
ID: 9392312
Physical Vapor Deposition (PVD) System, 12"
Process: Reflowsput
Chamber Position
C- Process type reactive PC
Process type SIP Ti: 1 And 5
Process type ALPS: 2
HT Al: 3 And 4
D - RT DSTTN
Process Type: Reactive PC
Chamber position: C
Chamber body:
Al
Part number: 0040-76718
Slit valve
Seal: Bonded
Door part number: 0040-84391
Bias Generator Frequency: 13.56 MHz and 2 MHz(In one generator)
RF:
Coil generator: COMDEL CDX-2000
Match box: 0010-21748 / 0010-52033
AMAT / APPLIED MATERIALS Part number : 0190-23308
Adaptor part/number: 0041-02659
Upper shield part/number: BELLJAR 0040-55456
Treatment (Arc spray / bead blast): AL2O3
Lower shield part/number: 0040-86514
Treatment (Arc spray / bead blast): Bead Blast
inner / mid shield part/number: 0021-19342
Shield clamp part/number: 0020-19258
Inner / mid shield clamp part/number: Insulator 0200-01903
Cryo gate valve (2/3 Pos): PENDULUM
MFC 1
Gas: He
Cal Factor: 1
Size: 300
Type: He
Part number: 0010-44160
MFC 2
Gas: Ar2
Cal Factor: 1
Size: 200
Type: Ar
Part number: 3030-13113
MFC 3
Gas: A
Cal Factor: 1
Size: 20
Type: Ar
Part number: 3030-13116
MFC 4
Gas: (MFC6) H2
Cal Factor: (MFC6) 1
Size: (MFC6) 100
Type: (MFC6) H2
Part number: (MFC6) 0015-02990
Chamber base pressure (T): 0.0000002
Chamber Rate of rise (nTorr / min): 15000
Process Ar supply pressure: 34.7
Process N2 supply pressure: 33.9
Vent Ar pressure: 47.7
Optional Gas (He): 30.1
CDA: 95.7
Slit valve CDA: 85
Cooling water flow (GPM): 0.8
Process type: SIP Ti
Chamber position: 1,5
Shutter option
chamber body:
(Al or SST): SS
Part number: 0040-98657
Slit valve:
Seal: Bonded
Valve door part number: 0040-84391
Target:
Vendor: Nikko/Tosoh
Bakeout / idle power (%): 0.4
DC Power supply (AE-MDX): AE-Pinnacle
AMAT Part number Master: 0190-08122
AMAT Part number Slave: 0190-08122
Generator size : 20kw
DC (12 kwh, 24kwh): 40 kw
Bias generator : ENI - GHW12Z
AMAT Part number : 0190-25529
Bias Generator:
Size: 1.25KW
Frequency: 13.56 MHz
Rf Match Box: 0010-02372/0010-52034
Magnet:
Rotation speed (RPM): 65
Shim thickness: Ch1:1.25mm Ch5:1.0mm
Type: LP-3.7.4
Part number: 0010-11228
Target to magnet spacing (mm): 1.5 ± 0.6
Adaptor part number: 0040-82921
Kit spacer:
Upper part number: 0040-7694
Lower part number: 0040-62877
Upper shield part number: 0020-23549
Treatment:
(Arc spray/Bead Blast): Arc Spray
(Arc spray/Bead Blast): Bead Blast
Lower shield:
Part number: 0020-02344
Clamp part number: 0020-02348
Inner / mid shield:
Part number: 0020-54777
Clamp part number: 0020-08299
Dep ring part number: 0200-08301
Cover ring part number: 0021-17770
Insulator bushing part number: 0200-00590
Shutter: 0021-25014
Pedestal:
Type: SLT FDR E-CHUCK
Part number: 0010-22985
Heater spacing in steps: -55050
Maximum Cryo regen gas load (L): 400
Cryo gate valve (2/3 Pos): 3-Position
MFC 1:
Gas: N2
Size: 200
Type: N2
MFC 3:
Gas: Ar
Size: 50
Type: Ar
MFC 4:
Gas: ArH
Size: 20
Chamber base pressure (T): 2.0 e-8
Chamber Rate-of-Rise (nTorr / min): 522
Process supply pressure:
Ar 30psi
N2 30psi
Cryo regen N2 pressure: 90
Vent Ar pressure: 40
CDA: 88
Slit valve CDA: 82
Cooling water flow (GPM): 8.9
Vent Ar pressure: 47.7
Lower shield part number: 0021-22065
Upper shield part number: 0021-21234
Process type: (RT DSTTN)
Chamber position: D
Heater spacing:
55mm
Steps: -51000
Optional gas (He): 37.9
CDA: 95.7
Cooling water flow (GPM): 11.2.
AMAT / APPLIED MATERIALS Endura II Aluminum Interconnect (AMAT) integrates a unique design that is specifically designed for the production of aluminum-based interconnects. This reactor is used in the development of advanced semiconductors and optoelectronic devices. It is an ideal equipment for technologies such as organic field-effect transistors (OFET) and organic light-emitting diodes (OLED). AMAT Endura II Aluminum Interconnect features an anisotropic etching process that ensures precise interconnects. This is possible thanks to the combined operation of an inductively coupled plasma (ICP) source and a low-pressure plasma source which allows for the etching of high aspect ratio metal traces with perpendicular edges, low contact resistance and no excessive loss of metal. The ICP source is combined with a resistive, low pressure, filtered Ar-Cl2 (argon-chlorine) process chamber, with an integrated, computer-controlled, dynamic temperature control system. This combination provides precision link processing, which is capable of producing high aspect ratio features, without any excessive loss of metal. It is also equipped with the Dynamic Pressure Control (DPC) unit, which ensures that process conditions are optimized for greater process control and improved reproducibility of interconnect designs. This machine also features a modern graphical user interface that can be used to control the process parameters. It can also import and export GDSII files, allowing for the conversion of existing designs into APPLIED MATERIALS interconnect format. With the ability to support angular layer coverage and control via intuitive commands, a wide range of process wafers can be produced. APPLIED MATERIALS Endura II Aluminum Interconnect also features a Filtered-Via technology that is capable of low-temperature interconnects with improved planarity and low intrinsic contact resistance. This feature is supported by an automated, low-temperature polymer injection tool for the filtered via interconnects. In conclusion, Endura II Aluminum Interconnect (AMAT / APPLIED MATERIALS) provides an integrated, precision, high-productivity and low-cost solution for the production of advanced aluminum-based interconnects. This asset's ability to produce high aspect ratio metal traces with perpendicular edges, low contact resistance, and no excessive loss of metal makes it an ideal choice for next-generation optoelectronic and semiconductor technologies.
There are no reviews yet