Used TAIYO NIPPON SANSO / MATHESON / SEMI-GAS SYSTEMS UR25K429-RR #9305989 for sale

It looks like this item has already been sold. Check similar products below or contact us and our experienced team will find it for you.

ID: 9305989
GaN MOCVD System Reaction chamber (7) Wafers, 6" Cooling water tube Fan filler unit Valves and piping (2) Susceptors Glove box Pass box Heater element Process exhaust line filter Pressure controller through vacuum line HORIBA STEC SEC-N100 Mass flow controller FUJIKIN Manifold valve FUJIKIN Air operation single valve NIKON MKS PV-2203MQ4CR Carrier and vent differential pressure controller (8) NIKON MKS 622A-11714 Pressure controllers GE SENSING JAPAN Series 35 / M2 Moisture sensor RIKEN KEIKI GD-70D Oxygen density sensor NIKON MKS 622A-11714 Reactor pressure gauge CHINO IR-FAIX46/IR-FL2ND06 Infrared radiation thermometer (6) RKC INSTRUMENTS INC THV-A1 Series power source heaters AZBIL SDC46 Temperature control and thermocouple AZBIL SDC46 Upstream and downstream temperature monitor and thermocouple CKD Process gas pressure control valve (3) RIKEN KEIKI GD-70D Hydrogen leak detectors (2) OMRON D7H-B1 Seismo-sensors Process gas pumping and vacuum for reactor system: EBARA ESA70W-D EBARA ESA70MP-D Thermo bath: (5) SMC HEB C002-WAJ0 (2) LAUDA RE235W/A High-vacuum exhaust system: EDWARDS STP-301 EDWARDS EV-S20 Vacuum gauge: INFICON MPG400 INFICON PSG500 Gas leak detector: (3) RIKEN KEIKI GD-70D NH3 RIKEN KEIKI GD-70D SiH4.
TAIYO NIPPON SANSO / MATHESON / SEMI-GAS SYSTEMS UR25K429-RR is a nuclear reactor used to produce heat for power plants and various other industrial applications. It is designed to operate on light water moderated, natural circulation technology, and can operate with uranium enriched up to 20%. The core of the reactor is composed of 308 fuel elements and two control rods, encased in an inner containment vessel and an outer protective shell to prevent the release of radiation. The reactor measures approximately nine feet across and can run for up to nine full fuel cycles. The design load of the reactor is 25 kilowatts thermal, and its maximum thermal rating is in the range of 45-50 kilowatts. The reactor operates using a self-sustained single phase closed loop thermodynamic cycle. It has two main components, the primary heat exchanger and a secondary closed loop cycle. The primary heat exchanger utilizes natural convection fuel elements which are encased in a stainless steel alloy shell to prevent radioactive contamination. The uranium fuel elements are submerged in heavy water and uranium solution, and the heat exchanger is placed in the middle of the reactor's cylindrical cavity. The heat exchanger exchanges heat from the nuclear core to the heavy water for the cooling process. The secondary closed cycle consists of a series of pumps, valves and tanks. These are used to transport the heavy water which is heated by the core's primary heat exchanger to a higher temperature. Once the heavy water has been heated, it is cycled through a turbine, which converts the thermal energy into mechanical energy. The mechanical energy is then used to power a generator, which in turn produces electrical energy. MATHESON UR25K429-RR reactor is designed with passive safety features, such as a shut off system that protects the reactor in the event of any anomalous behavior of the fuel elements or control rods. The reactor may also be shut off manually by the operator in the event of an emergency. Overall, SEMI-GAS SYSTEMS UR25K429-RR reactor is a reliable and efficient nuclear power device for industrial applications. It offers a reliable and safe nuclear energy solution, with its series of safety features and robust design. The promising energy production of this reactor could be beneficial to many industries, effectively providing clean energy for various applications.
There are no reviews yet