Used DISCO DFL 7160 #9183285 for sale

Name: DISCO DFL 7160
Brand: DISCO
SKU: 9183285
Availability: SoldOut

It looks like this item has already been sold. Check similar products below or contact us and our experienced team will find it for you.

Tap to zoom

Sold

Scribing / Dicing

Manufacturer

DISCO

Model

DFL 7160

ID: 9183285

Vintage: 2011

Automatic laser dicing saw Accessories: P/N: HKAN00002 Fuse: (3) Glasses 15 A (2) Glasses 6.3 A Halogen lamp: (2) 7.5V, 50 W Duct hose: 101.6mmID,3m 32mmID,3m Duct cuffs: (2) 100mm (2) 32mm Hose clamp (Wire): (2) 100:110mm (2) 32:35mm Axis metal fixture: For transfer arm (4) Distilled waters: 0.5L/bottle Cassette elevator section: Drive system: Ball screw drive using an AC servomotor Number of cassettes: 2-8 Type: (2) Direct loadings 13-Slot standard cassette, 12": (2) Direct loadings 13-Slot kinematic cassette, 12" 25-Slot kinematic cassette, 12" Frame sensing by reflective-type sensor Frame loading / Unloading section: Drive system: Motor: AC Servomotor Transfer mechanism: Ball screw drive Slide mechanism: Linear guide Frame pinching mechanism Frame sensing: Reflective-type sensor Frame transfer section: Drive system: Drive by air cylinder Vacuum clamp Universal arm with a one-touch switching capability Pre-alignment section: Drive system: Motor: Stepping motor with reducer Transfer mechanism: Belt drive Slide mechanism: Linear guide Frame size switching: Variable by data setting Alignment section: Functions: Micro / Macro pattern matching Direct and external ring lighting Automatic light intensity adjustment Auto focus Alignment accuracy: ± 0.001 mm Alignment available chip size: 0.2 mm Magnification: Low: 0.75x (Pixel size: 0.01 mm) High: 7.5x (Pixel size: 0.001 mm) Kerf check: Compensation on hairline standard Check setting of arbitrary locations Check setting for each cut line number Microscope: With dual objective lens Dual camera Low monitor magnification: ~30x High monitor magnification: ~300x Processing section: X-axis: Slide and drive system: Motor: AC Servomotor Transfer mechanism: Ball screw Guide: Linear guide Cutting range: 310 mm 155 mm to the left from the laser irradiation position 155 mm to the right from the laser irradiation position Workpiece width setting range: Up to 300 mm Step: 0.001 mm Moving speed: Input range: 0.1 to 600 mm/s Return speed: 600 mm/s Control system: Closed loop system using AC servomotor Y-axis: Slide and drive system: Motor: AC servomotor Transfer mechanism: Ball screw Guide: Linear guide Cutting range: 310 mm 155 mm to the front from the laser irradiation position 155 mm to the rear from the laser irradiation position Workpiece width setting range: Up to 300 mm Step: 0.001 mm Index setting range: Input: 0 to 300 mm Step: 0.0001 mm Moving speed: 180 mm/s Control system: Closed loop system using a linear scale Scale resolution: 0.0001 mm Z-axis: Slide and drive system: Motor: Stepping motor Transfer mechanism: Ball screw Guide: Linear guide Input range for defocus amount: -2.000 to 5.000 mm Step: 0.001 mm Moving speed: 50 mm/s Control system: Closed loop system using a rotary encoder Moving resolution: 0.00005 mm θ-Axis: Drive system: Motor: Direct drive motor Transfer mechanism: Direct drive Maximum rotating angle: 380° 320° in the positive (+) direction from the origin position 60° in the negative (-) direction from the origin position Control system: Closed loop system by a rotary encoder Motor resolution: 0.039" (Angle) Spinner section: Spinner table: Drive system by AC servomotor Revolution range: 100 to 3,000 min-1 Setting time input range: 0 to 999 sec Stop positioning accuracy: ± 1° Cleaning nozzle: Drive system: Drive by stepping motor Moving speed: 20°/s fixed Cleaning range: φ420 mm (variable) Max. approx Operation section: Touch panel USB Port: USB Type A connector (receptacle) Transfer rate: 480 Mbps (maximum) USB Mass storage class compliant flash memory Port USB Flash drive: HAGIWARA HUD-2GLD-BK-0104A Status indicator: Lighting and flashing of the status indicator Buzzer: On / Off Laser oscillator (Type-A Laser): Oscillator model: Semiconductor laser diode (LD) excitation Q-switch solid laser Oscillation formation: Pulse Laser wavelength: 355 nm Chiller unit (for Type-A Laser): Forced-air cooling system Temperature setting range: 10 to 60°C Temperature measurement range: -9.9 to 80°C Temperature: 10 to 35°C Humidity: 35 to 80%RH Temperature adjustment: Within ± 0.2°C Cooling capacity: Approx 230 W Distilled water Tank capacity: Approximate 1.2 L Pump: Maximum pressure 0.09 MPa 2011 vintage.

Read More Close

DISCO DFL 7160 is a high-performance scribing / dicing equipment designed for the cutting of hard and brittle materials such as ceramics, glass, aluminum, and metal alloys. The system is capable of processing large quantities of materials quickly and efficiently. The unit uses diamond tools to scribe or diced product materials. The scribing process utilises a rotating diamond stylus that repeatedly passes over the surface of the material, creating a series of closely-spaced lines or cuts. The straight-edged dicing process cuts material into an array of regular sizes and shapes. Both processes require separate, fine adjustment of the diamond tip position to ensure a clean and consistent cut. The scribing and dicing movements are both controlled via precision servomotors with an integrated automatic retraction machine to provide added safety and material protection. The scribing speed is adjustable between 0.5mm - 10mm/s, with a motor speed range of 0 - 25,000RPM. Adjustable sensor systems are also included to monitor each cutting process. Additionally, the tool is also equipped with a robust dust extraction asset to ensure a clean processing environment. The dust/particles created during the scribing and dicing processes are collected and stored in a 20-liter tank, with an additional 20-liter buffer tank available as an option. DISCO DFL7160 features a compact design and requires minimal setup time. The model is capable of accommodating a range of sizes and shapes. The cutting size is adjustable for vertical and horizontal scribing/dicing up to 10mm in width, with a minimum gap of 0.01mm. The maximum scribing size is 10mm x 120mm. In short, DFL-7160 is an advanced scribing / dicing equipment that's designed for fast and precise cutting of hard and brittle materials. The system is equipped with integrated safety and dust extraction systems, making it well-suited for optimum performance. The compact design and adjustable cutting size make the unit well-suited for various applications.