Used GT SOLAR DSS-240 #293756977 for sale
URL successfully copied!
ID: 293756977
Furnaces
Cooling water:
Water quality: ASTM-D5127 Type E-4 Cooling water
Capacity: 3600 kWh per growth cycle
Flow rate: 120-130 LPM
Inlet pressure: 3.4 - 4.4 bar
Pressure drop: 2.5 bar minimum
Inlet temperature: 21°C - 30°C
Temperature rise: 8°C average, 12°C maximum
Connection: Female NPT, 2" (2 x 50.8mm)
NP / City water:
Flow rate: Gravity feed at 60 LPM (16 GPM) in open drain
Inlet pressure: 4.5 bar
CDA:
Consumption: 0.5 m^3 per growth cycle
Inlet pressure: 5-8 bar at 49°C maximum
Connection: Male NPT, 0.25" (6.35mm)
Process gas:
Consumption: Argon at 55 m^3 per growth cycle
Max flow rate: 50 LPM
Inlet pressure: 2 bar
Connection: NW−16 with over pressure ring
Process exhaust:
Flow Rate: Vacuum pump and over pressure vent
Connection:
Vacuum pump: 2.375" OD
Overpressure vent: 6.625" OD
Performance:
Throughput: 1240 Kg in got per run/50hrs
Environmental conditions:
Ambient temperature
Humidity: 5°C - 30°C at 65% relative humidity
Power:
Connection: I.D. Electrical conduit, 3" (76.2mm)
Voltage:
400/440/480 VAC (380 VAC suitable)
3 Phase, 50/60 Hz, 3-wire delta connection plus ground
Current:
295/270/250 A at 400/440/480 VAC maximum
304 A at 380 VAC maximum.
GT SOLAR DSS-240 is an industrial grade, high-powered solar production equipment used for small to large-scale photovoltaic production. It is comprised of a range of automated equipment specifically designed to maximize efficiency during production. The unit offers a comprehensive production program with a wide range of configurable options to fit the unique needs of customers. The equipment can produce both monocrystalline and multicrystalline photovoltaic cells at high-yields, owing to its advanced technological base. It includes an advanced, three-dimensional embedded system (3D ES) module, which is designed to reduce cost, maximize yield and fully utilize the solar production unit's integrated components. The module offers a range of process control options and can be configured to meet customer requirements. The machine also includes a flexible beam tool, which enables fast and easy changes to the location and alignment of the production line. The asset has an array of sensors providing continuous feedback from all production stages, allowing operators to accurately assess production performance and address issues quickly. DSS-240 also offers several other advanced features aimed at streamlining the production process. These include a dynamic passivation cell (DPC) which adds the maximum amount of passivated area to each solar panel while still ensuring increased longevity and extended efficiency. A quick die sorting (QDS) mechanism allows for quick sorting of defective modules. An automated pick-and-place model includes a barcode scanning function, which allows operators to quickly identify production issues related to faulty modules. The equipment includes a closed-loop feedback system, which allows the customer to monitor the production process and make necessary updates in order to meet their desired target. The unit also includes a failsafe machine, which ensures that the PV cells are unaltered during the production process and are free of any damage. Finally, GT SOLAR DSS-240 produces minimal noise pollution, as it is designed to run efficiently while utilizing low sound pressure levels. The tool can also be connected to remote monitoring software, allowing the customer to continuously monitor and adjust optimization parameters in a timely and efficient manner.
There are no reviews yet