Used NPC NTS-150-SH-4K #9254491 for sale
URL successfully copied!
Tap to zoom
ID: 9254491
Tabber / Stringing machine
Cell size:
165 mm x 156 mm (Both for 3 and 4 busbars)
Cut cell, 6"
Cell thickness: 150-300 Micrometer
Bowing height of incoming cells: Up to 2 mm
Distance between busbars:
52 mm ± 0.05 mm: 6" (3 Busbars)
38 mm - 39 mm: 6" (4 Busbars)
Flow direction: Right to left
Maximum string length: 2000 mm
Maximum cell in string: 12 Cells, 6"
Length of head / End tab: 10 - 30 mm
Cell gap: 1.5 - 30 mm
Accuracy:
Cell distance: ±0.2 mm
Ribbon alignment: ±0.3 mm
Throughput: 6 Sec/cell, 600 cells/hours
Cell magazine:
Half cut cell, 6"
Maximum cells: Up to 200 cells
Magazine conveyor: (2) Conveyor lines with (3) magazines
Cell transfer: Cell discharge position to LED table by vacuum pads
Cell alignment:
Vision system
CCD Camera: Black and white
Resolution: 1600 x 1200
Illumination:
LED Table
LED Bar
String conveyor: Stainless steel belt
Vacuum belt transport:
(2) Vacuum belts
(5) Soldering belts
Belt cleaning system with drip pan
Stage heater
Heating and pre heating 1 and 2: Temperature 30°C - 200°C with air cooling
Control:
OMRON PLC CJ Series
Storage: Up to 16 recipes
Ethernet port
HMI:
Interface: Digital pro face touch screen
Alarm message and troubleshooting
Safety features:
Emergency stop
Buzzer
Signal tower
Compressed air:
Air pressure: 0.4-0.5 MPa
Exhaust: 600 L/min
Volume: 2200 L/min
Room condition:
Temperature: 25°C, ±5°C
Humidity: 40-50%
Accessories:
(10) Cell magazines
(3) String trays
Flux nozzle cleaning kit
Padlock
Manual data CD
Spare parts:
Pin holder set:
Stainless pin
Sleeve
Spring
(44) E-Rings
(2) Hot air heater elements
Vacuum pads for:
(4) Cell load
(4) Alignment
(4) Cell transfer
(4) String transfer
(4) String flip over
Vacuum generator
(6) Flux valves with connector
(6) Flux nozzles: 0.076 mm Diameter
Power supply: 200 VAC, 25 kVA, 3 Phase, 50/60 Hz.
NPC NTS-150-S-H-4K is a cutting-edge solar production equipment made specifically for use in extreme temperature environments. This robust, reliable, and corrosion-resistant unit is designed to be able to withstand the most rigorous industrial requirements. The unit is equipped with a powerful inverter output and advanced control systems, making it suitable for production in harsh environmental conditions. The inverter includes a voltage stability equipment, as well as digital signal processing (DSP) technology for improved optimization. Additionally, it comes with multiple redundancy components and a secure monitoring solution to ensure full control and safety. The featured components include a generator, solar panel, a PV module, MPPT/Charge Controller, an adjustable rotary joint mechanism, an automatic array tracking system, and a heat exchanger. It also features a monitoring unit and a very efficient air-cooling machine with superior noise reduction capabilities. NTS-150-S-H-4K is equipped with an advanced PLC tool, PC control asset, and remote monitoring model, thereby enabling the unit to be easily monitored, managed, and operated remotely. It also comes with a number of safety features to ensure maximum safety, such as electrical and mechanical protections, as well as a special over-pressure protection equipment. In terms of outputs, NPC NTS-150-S-H-4K can produce up to 150kW of peak power. The system is highly compatible with a range of batteries, including lead-acid, GEL, AGM, LiFePO4, and more. Moreover, it is fitted with high voltage accessories, high voltage IGBT components, as well as an over-load protection unit to prevent damage caused by over-currents or short-circuits. Overall, NTS-150-S-H-4K is a top-of-the-line solar production machine designed for use in extreme temperatures. It features powerful components and advanced control systems, as well as safety features and remote monitoring capabilities. It is capable of producing up to 150kW of peak power and is compatible with a range of batteries and protection systems for maximum efficiency and safety.
There are no reviews yet