Used ULVAC SME-200J #293609370 for sale

ULVAC SME-200J is a vertically-aligned sputtering equipment that is widely used in thin film coating applications. It consists of three main components: a vacuum chamber, a rotating sputter head, and a power supply. The chamber is typically made up of stainless steel, and includes a pumping port, process gases, and deposition valves. The chamber also has an evacuation process to eliminate surface contamination. The rotating sputter head contains one or more cathodes, which are powered by the power supply to create ions in the chamber. The sputter head supplies the momentum for the deposition of the thin film onto the substrate. This system also contains an adjustable gas pressure regulator and a process gas valve, which can be used to adjust the plasma atmosphere during the sputtering process. The unit is powered by an alternating current (AC), which is applied to the cathodes. As the cathodes move, they create an electric field in a controlled spatial pattern. This electric field gives the substrate electrical charge, and thus causes the deposition of the thin film onto the substrate. This process is known as sputtering. The sputter source within the sputter head is also responsible for making sure that the thin film is uniformly deposited on the substrate. It sprays both the component material and a carrier gas onto the substrate, where the component is deposited in an even layer. The sputter source can also be used to alter the thickness of the thin film, by spraying the carrier gas in different shapes and sizes. By controlling the process variables like sputtering voltage, Power, deposition pressure and reactive gas flow, the thin film is able to reach the desired properties for a particular application. ULVAC SME 200 J machine is a reliable and cost-effective solution for thin film coating applications. Its features make it well-suited for a variety of industrial applications, including automotive, optical, and coating of medical instruments. The efficient design of the sputtering tool and the ability to control the variables makes it a great choice for depositing thin films to fabricate components with the desired properties for any application.