Used CUSTOM System #9027485 for sale
URL successfully copied!
ID: 9027485
Polypro wet bench, 4'
To Include the following:
- Triple welded white polypro construction
- Casters and leg levelers
- Sloped plenum bottom for complete drainage
- 1 each, 2” plenum drain
- Down draft and back draft exhaust
- Photohelic gauge with interlock to EPO
- 1 each, 1” Polypropylene recirculation type DI manifold
- 1 each, Teflon N2 and DI guns
- 220 VAC, single phase, Power Distribution Center with EPO
- Low voltage control wiring
- Sealed wire ways to control panel
Components to include the following:
Cascade Megasonic System Model MSD-CP18-180
Natural Polypro Megasonic Overflow Cascade Tank.
Tank to accommodate one standard 200mm cassette utilizing the direct Megasonic system.
MSD system includes the following:
Cascade tank with bottom DI water inlet manifold
360 degree overflow
Two (2) 900 watt digital Megasonic Generators
which include the following:
- Five (5) outputs per generator totaling 900 watts (1800 watts total)
- Automatic frequency control
- Automatic power tuning
- Power level control
- 950kHz operation frequency
One (1) 316L stainless steel transducer plate
which includes:
- 10 piezoelectric crystals
- Teflon gasket seal
- Natural polypro transducer cover
- Coaxial connection with 5 meter cables
One (1) model T16a digital timer
Timer will interface with megasonic generators and cascade water
flow to give you a controlled on/off feature for both items
One (1) DR18s Quick Dump Rinser
-Natural polypro construction
-Rinser designed to hold 1-86” cassette
-360-degree overflow
-One (1) high capacity dump door
-Natural polypro top spray manifold
-All tubing and fittings included
-Two (2) DI water valves (top spray and bottom fill)
-One (1) N2 valve (adjustable)
-Clear PVC retractable cover
One (1) C15sa Rinser controllers
for use with DR-series dump rinsers:
-24vac power requirement
-All pneumatic pilot signals
-Colored pneumatic Teflon signal cable.
A CUSTOM Equipment wet station is an advanced water treatment System that provides purification and disinfection of water. It is designed to offer superior water quality for multiple applications, including industrial, commercial, and residential settings. CUSTOM Unit wet station combines advanced filtration with chemical disinfection to remove organic, inorganic, and biological contaminants from water sources. It uses a three-stage filtration process, which includes a sediment filter, carbon filter, and a polishing filter. The sediment filter removes physical debris and solid particles from the water. The carbon filter removes chlorine, organic compounds, and volatile organic compounds. The polishing filter removes fine particles and dissolved contaminants.Machine wet station also features a UV disinfection technology. This UV disinfection process utilizes high-intensity, short-wavelength UV light to inactivate microorganisms. UV light inactivates microorganisms, such as viruses, bacteria, and cysts, by destroying their cell walls. CUSTOM Tool wet station also features a chlorine injection technology. Chlorine injection is used to destroy organic contaminants in water and prevent their re-entry into the water supply. Chlorine is injected into the water just before it enters the filtration Asset, allowing for an additional level of disinfection. CUSTOM Model wet station is also designed to ensure water efficiency. It features a performance monitoring Equipment which allows for real-time monitoring of water flow, pressure, and temperature. This allows for the detection of any changes in water quality that may lead to inefficient operations. CUSTOM System wet station is designed with safety in mind. It features several safety features including pressure relief valves, non-return valves, and watertight enclosures. All of these features help to ensure the safety of Unit and the people who use it. In summary, CUSTOM Machine wet station is a highly advanced water treatment Tool designed to create the highest quality water for multiple applications. It features a multi-stage filtration CUSTOM Asset, UV disinfection, and chlorine injection technologies to remove biological, organic, and inorganic contaminants. Model is designed with safety and efficiency, ensuring the safety of CUSTOM Equipment and providing real-time monitoring of water flow and pressure.
There are no reviews yet