Used SCHMID 58 #9114417 for sale

SCHMID 58 is a wet station designed to wet process certain materials. It is equipped with a number of individual wet processing machines, such as a cleaner, pre--treatment unit and the electroplating unit. The cleaner removes dirt, oxide and scale from surfaces. It is a two-stage attenuated powdering system, with the first powder rapid consumption for removing coarse contamination, while the second powder is a fine one, for high gloss and optimized cleaning results. Other components of the cleaner are the powder vibrator and the powder recycling system. The pre--treatment unit is used to activate the surface prior to plating, and to enhance its adhesion level. It uses a combination of different chemicals, depending on the desired result. The cleaning unit is continuous, with a number of pumps operating in a parallel circuit. The electroplating unit is the most crucial part of the station, where linear levels of current, voltage, temperature and other process parameters are monitored. It is designed to perform both level and selective electroplating, with the results of the plating monitored and often adjusted by using an onboard electronic controller. 58 is equipped with two drying chambers, which allow for a fast and safe drying of the parts after plating. They are designed to enable quick, efficient and low-cost drying at different temperature settings. Both drying chambers include adjustable fans and are equipped with a humidity controller. This allows for an optimal humidity level in the drying chamber and thus makes the drying process effective. SCHMID 58 is designed for use in large scale production for many kinds of materials, such as steel, brass, zinc, titanium and others. It is reliable and efficient, and ensures high quality of the plated parts, with minimal waste and low process costs. 58 allows for an excellent wet processing of materials with high precision levels.