loading

319 RESULTS FOUND FOR: used Crystal Growing, Sawing & Slicing

1 2 3 4 5 6 Next
  • AMAT / APPLIED MATERIALS: HCT B5

    AMAT / APPLIED MATERIALS HCT B5 Wire saws 2010 vintage.
  • AMAT / APPLIED MATERIALS: E500SD-B/5

    AMAT / APPLIED MATERIALS E500SD-B/5 Wire saw Water input: Input pressure: >2.5 bar Input temperature: <9°C Cooling unit power: 150 kW Incoming water flow (without cooling compressor): 18.5 m³/h Machine: Wire speed / Acceleration: 18*/5 m/s / m/s² Wire guides length: 520 mm Wire guides diameter: 300 mm Horizontal working space: 360 mm (4) Wire guides Wire guides drives power: 2x61 kW (2) Tables: Travel (depends on clamping): 290 mm Cutting speed: 0-9000 um/min Fast table speed: 0-500 mm/min Hydraulic passive clamping system Wire: (8) Pulleys Wire tension: 0-30N Wire length: 640 km Wire web width: 500mm Slurry: Tank capacity: 550 lit Pumping capacity: 2x160-200 * (1,6 kg/dm3) kg/min Pump power: 3x7.5 kW Pumping speed adjustment: 0-100% (3) Pumps (6) Manifolds in slicing room Frame & others: Stainless steel Sliding doors Color of frame and panels: RAL 5011 Utilities: Air pressure: 4 to 6 bar Air flow (dry): Min 25 m3/h Air exhaust (pipe ø150 mm): 3x100 m3/h Cooling unit power: 150 kW Incoming water pressure: Min 2.5 bar Incoming water temperature (with cooling compressor): 20 (30 RFNS) °C max 20 Incoming water temperature (without cooling compressor): 9 °C Max Incoming water flow (with cooling compressor): 10.3 m3/h Incoming water flow (without cooling compressor): 18.5 m3/h B5 Base with retrofit hardware Diamond wire technology Machine can run with 120 or 100 µm wire Electrical hooking 50 / 60 Hz: 3x400 / 480 Average power (with cooling compressor): 208 kVA Maximum power (with cooling compressor): 339 kVA Average power (without cooling compressor): 156 kVA Maximum power (without cooling compressor): 287 kVA Grid failure safety option 2011 vintage.
  • AMAT / APPLIED MATERIALS: E500SD-B/5

    APPLIED MATERIALS E500SD-B/5 Wire saw Water input: Input pressure: >2.5 bar Input temperature: <9°C Cooling unit power: 150 kW Incoming water flow (without cooling compressor): 18.5 m³/h Machine: Wire speed / Acceleration: 18*/5 m/s / m/s² Wire guides length: 520 mm Wire guides diameter: 300 mm Horizontal working space: 360 mm (4) Wire guides Wire guides drives power: 2x61 kW (2) Tables: Travel (depends on clamping): 290 mm Cutting speed: 0-9000 um/min Fast table speed: 0-500 mm/min Hydraulic passive clamping system Wire: (8) Pulleys Wire tension: 0-30N Wire length: 640 km Wire web width: 500mm Slurry: Tank capacity: 550 lit Pumping capacity: 2x160-200 * (1,6 kg/dm3) kg/min Pump power: 3x7.5 kW Pumping speed adjustment: 0-100% (3) Pumps (6) Manifolds in slicing room Frame & others: Stainless steel Sliding doors Color of frame and panels: RAL 5011 Utilities: Air pressure: 4 to 6 bar Air flow (dry): Min 25 m3/h Air exhaust (pipe ø150 mm): 3x100 m3/h Cooling unit power: 150 kW Incoming water pressure: Min 2.5 bar Incoming water temperature (with cooling compressor): 20 (30 RFNS) °C max 20 Incoming water temperature (without cooling compressor): 9 °C Max Incoming water flow (with cooling compressor): 10.3 m3/h Incoming water flow (without cooling compressor): 18.5 m3/h B5 Base with retrofit hardware Diamond wire technology Machine can run with 120 or 100 µm wire Electrical hooking 50 / 60 Hz: 3x400 / 480 Average power (with cooling compressor): 208 kVA Maximum power (with cooling compressor): 339 kVA Average power (without cooling compressor): 156 kVA Maximum power (without cooling compressor): 287 kVA Grid failure safety option 2011 vintage. HCT HCT E500 E-8 Wire saw
  • AMAT / APPLIED MATERIALS: E500SD-B/5

    AMAT / APPLIED MATERIALS E500SD-B/5 Wire saw Water input: Input pressure: >2.5 bar Input temperature: <9°C Cooling unit power: 150 kW Incoming water flow (without cooling compressor): 18.5 m³/h Machine: Wire speed / Acceleration: 18*/5 m/s / m/s² Wire guides length: 520 mm Wire guides diameter: 300 mm Horizontal working space: 360 mm (4) Wire guides Wire guides drives power: 2x61 kW (2) Tables: Travel (depends on clamping): 290 mm Cutting speed: 0-9000 um/min Fast table speed: 0-500 mm/min Hydraulic passive clamping system Wire: (8) Pulleys Wire tension: 0-30N Wire length: 640 km Wire web width: 500mm Slurry: Tank capacity: 550 lit Pumping capacity: 2x160-200 * (1,6 kg/dm3) kg/min Pump power: 3x7.5 kW Pumping speed adjustment: 0-100% (3) Pumps (6) Manifolds in slicing room Frame & others: Stainless steel Sliding doors Color of frame and panels: RAL 5011 Utilities: Air pressure: 4 to 6 bar Air flow (dry): Min 25 m3/h Air exhaust (pipe ø150 mm): 3x100 m3/h Cooling unit power: 150 kW Incoming water pressure: Min 2.5 bar Incoming water temperature (with cooling compressor): 20 (30 RFNS) °C max 20 Incoming water temperature (without cooling compressor): 9 °C Max Incoming water flow (with cooling compressor): 10.3 m3/h Incoming water flow (without cooling compressor): 18.5 m3/h B5 Base with retrofit hardware Diamond wire technology Machine can run with 120 or 100 µm wire Electrical hooking 50 / 60 Hz: 3x400 / 480 Average power (with cooling compressor): 208 kVA Maximum power (with cooling compressor): 339 kVA Average power (without cooling compressor): 156 kVA Maximum power (without cooling compressor): 287 kVA Grid failure safety option 2011 vintage.
  • AMAT / APPLIED MATERIALS / HCT: 500SD-B/5

    AMAT / APPLIED MATERIALS / HCT 500SD-B/5 Wire saws Machine: Wire speed / Acceleration maximum: 18" / 5 m/s Wire guides length: 520 mm Wire guides diameter: 300 mm Horizontal working space maximum: 360 mm (4) Wire guides Wire guides drives power: 2 x 61 kW Table: Travel maximum (depends on clamping): 290 mm Cutting speed: 0 - 9000 mm/min Fast table speed: 0 - 500 mm/min Passive clamping system: Hydraulic (2) Tables Wire: (8) Pulleys Wire tension: 0-30 N Wire length maximum (For 0 160pm): 640 km Wire web width typical: 500 mm Slurry: Tank capacity: 550 liter Pumping capacity maximum (1,6 kg/dm3): 2 x 160-200 * kg/min Pump power: 3 x 7.5 kW Pumping speed adjustment: 0-100% (3) Number of pumps (6) Manifolds in slicing rooms 2008-2009 vintage.
  • AMAT / APPLIED MATERIALS / HCT: E500SD-B/5

    AMAT / APPLIED MATERIALS / HCT E500SD-B/5 Wire saws. E400S24 E400S24 There are many HCT wire saws out there, I would only be interested in an E400S24, 600 x 550 x 400 mm size. Thanks, Bill
  • AMAT / APPLIED MATERIALS / HCT: E500SD-B/5

    AMAT / APPLIED MATERIALS / HCT E500SD-B/5 Wire saws 2008 vintage.
  • AMAT / APPLIED MATERIALS / HCT: 500SD-B/5

    AMAT / APPLIED MATERIALS / HCT 500SD-B/5 Wire saws Machine: Wire speed / Acceleration maximum: 18" / 5 m/s Wire guides length: 520 mm Wire guides diameter: 300 mm Horizontal working space maximum: 360 mm (4) Wire guides Wire guides drives power: 2 x 61 kW Table: Travel maximum (depends on clamping): 290 mm Cutting speed: 0 - 9000 mm/min Fast table speed: 0 - 500 mm/min Passive clamping system: Hydraulic (2) Tables Wire: (8) Pulleys Wire tension: 0-30 N Wire length maximum (For 0 160pm): 640 km Wire web width typical: 500 mm Slurry: Tank capacity: 550 liter Pumping capacity maximum (1,6 kg/dm3): 2 x 160-200 * kg/min Pump power: 3 x 7.5 kW Pumping speed adjustment: 0-100% (3) Number of pumps (6) Manifolds in slicing rooms 2008-2009 vintage.
  • AMAT / APPLIED MATERIALS / HCT: 500SD-B/5

    AMAT / APPLIED MATERIALS / HCT 500SD-B/5 Wire saws Machine: Wire speed / Acceleration maximum: 18" / 5 m/s Wire guides length: 520 mm Wire guides diameter: 300 mm Horizontal working space maximum: 360 mm (4) Wire guides Wire guides drives power: 2 x 61 kW Table: Travel maximum (depends on clamping): 290 mm Cutting speed: 0 - 9000 mm/min Fast table speed: 0 - 500 mm/min Passive clamping system: Hydraulic (2) Tables Wire: (8) Pulleys Wire tension: 0-30 N Wire length maximum (For 0 160pm): 640 km Wire web width typical: 500 mm Slurry: Tank capacity: 550 liter Pumping capacity maximum (1,6 kg/dm3): 2 x 160-200 * kg/min Pump power: 3 x 7.5 kW Pumping speed adjustment: 0-100% (3) Number of pumps (6) Manifolds in slicing rooms 2008-2009 vintage.
  • APEKS: 250

    APEKS 250 Sapphire growing furnace De-installed 2011 vintage.
  • DOALL: 1612-0

    DOALL 1612-0 Vertical band saw, 16" Maximum work height: 12" x 24" x 24" Tilting work table Saw blade length: 126" Doall DBW-15 welder, grinder, blade shear Push button controls Coolant Saw blade and guides Work light 1-1/2 HP motor and controls 1969 vintage.
  • DOALL: 2630-D48

    DOALL 2630-D48 Vertical band saw 26" x 30" Hydraulic feed 2000 vintage.
  • HARA:

    HARA Slab saw for ingot cutting, 2005 vintage.
  • HCT: E500 E-8

    HCT E500 E-8 Wire saw Includes: Optical instrument (6) Wire guiders 2007 vintage.
  • HCT: E500 E-8

    HCT E500 E-8 Wire saw Includes: Optical instrument (6) Wire guiders 2006 vintage.
  • HCT: 500 SD-B/5

    HCT 500 SD-B/5 Wire saw, 2008 vintage.
  • HCT: E500 E-8

    HCT E500 E-8 Wire saw Includes: Optical instrument (6) Wire guiders 2007 vintage.
  • HERBERT ARNOLD: 72/3305

    HERBERT ARNOLD 72/3305 Quartz cutting machine.
  • ISHIIHYOKI: IT-500W

    ISHIIHYOKI IT-500W Multi wire saw.
  • JYT: JRDL-900-RN

    JYT JRDL-900-RN Monocrystaline Silicon Grower, 2010 vintage.
Show per page
1 2 3 4 5 6 Next