loading

623 RESULTS FOUND FOR: used Packaging

1 2 3 4 5 6 Next
  • ACCUSEAL: HDMP3

    ACCUSEAL HDMP3 Vacuum sealer.
  • ACCUSEAL: HDMP3

    ACCUSEAL HDMP3 Vacuum sealer.
  • ADT / K&S: WM-966

    ADT / K&S WM-966 System.
  • ADVANCED ENGINEERING: MWM-850

    ADVANCED ENGINEERING MWM-850 Manual wafer mounters, up to 8" Built-in vacuum generator Closed-loop digital platen temperature control Options: Static eliminator UV tape Non-contact mounting 110/220VAC, single phase, 50/60Hz Air: 5 bar, CDA.
  • ADVANCED ENGINEERING: MWM-850

    ADVANCED ENGINEERING MWM-850 Manual wafer mounters, up to 8" Built-in vacuum generator Closed-loop digital platen temperature control Options: Static eliminator UV tape Non-contact mounting 110/220VAC, single phase, 50/60Hz Air: 5 bar, CDA.
  • ADVANCED ENGINEERING: MWM-850

    ADVANCED ENGINEERING MWM-850 Manual wafer mounters, up to 8" Built-in vacuum generator Closed-loop digital platen temperature control Options: Static eliminator UV tape Non-contact mounting 110/220VAC, single phase, 50/60Hz Air: 5 bar, CDA.
  • ADVANCED ENGINEERING: MWM-850

    ADVANCED ENGINEERING MWM-850 Manual wafer mounters, up to 8" Built-in vacuum generator Closed-loop digital platen temperature control Options: Static eliminator UV tape Non-contact mounting 110/220VAC, single phase, 50/60Hz Air: 5 bar, CDA.
  • ADVANTEK: ATR 2000

    ADVANTEK ATR 2000 Tape and reel machine.
  • ADWILL / LINTEC: RAD 2000 / M12

    ADWILL / LINTEC RAD 2000 / M12 UV Tape irradiation system, 4"-12" Semi automatic Processing capacity: 22 sec/wafer Tapes: D Series (UV Curable dicing tape) LE Tape (Dicing die bonding tape) Air supply: Air pressure: 0.5 - 0.8 Mpa Air consumption: +250 l/min Nitrogen source: Pressure: 0.29 Mpa Consumption: 30 - 50 l/min Power supply: Voltage: AC 200 - 230 V Frequency: 50 / 60 Hz Single Phase Power consumption: 5.0 kW Spare parts included 2006 vintage.
  • AKEBONO: MS-11

    AKEBONO MS-11 Strapping machine.
  • ALLRING: RK-IB 600L

    ALLRING RK-IB 600L Ball mounter 2004 vintage.
  • AMKOR: 6 CHASE 264 CAV

    AMKOR 6 CHASE 264 CAV SSO20 Mold Tool.
  • AMKOR: 6 CHASE 264 CAV

    AMKOR 6 CHASE 264 CAV SSO20 Mold Tool.
  • APACHE: AL13P

    APACHE AL13P Laminator.
  • APS / AUTOMATED PRODUCTION SYSTEMS: FASTWRAP AIRPOUCH

    APS / AUTOMATED PRODUCTION SYSTEMS FastWrap AirPouch System.
  • ASM: IDEALMOLD--MUF

    ASM IDEALmold--MUF Singulated transfer mold machine (4) Press modules, 120-ton Mold Chases: not included Product Related Parts (PRP): not included Hard disk/OS: not included Mold application software: not included 220/208V, 3ph, 50/60Hz, 100A Currently crated 2013 vintage. ASM IDEALmold
  • ASM: IDEALMOLD 170T

    ASM IDEALmold 170T Molding system Type: Electro mechanical servo type With 4-pin toggle mechanism. Mold clamping force: 120 Metric tons max Force misalignment of 4 columns: < ± 5 % of Mean value Clamping force repeat ability: < ± 1 % F.S Clamping force absolute accuracy: ± 1 Metric Tons (Test report) Soft clamp capability: 155 x 50 x 0.1 mm Lower platen full stroke: 176 mm (Including 6mm ejection) Daylight: 646 mm Press daylight adjustment: No Minimum mold closing + lock time: 1.4 sec. for 5-165 stroke Minimum mold opening time: 1.4 sec. for 5-165 stroke Low speed closing: 1 mm/sec Low speed opening: 1 mm/sec Position repeat ability: ± 0.1 mm Parallelism of mold platen: < ± 0.05 mm Straightness of mold platen: < ± 0.03 mm Deformation of mold platens: < 0.0254 mm / 305 mm span Mass of lower mold and housing: 150 kg ( approx.) Feedback method: Incremental encoder on motor axis Transfer: Type: Electro mechanical low RAM movement Transfer force: 3 Metric tons max Transfer force accuracy: ± 50 kg Transfer force repeat ability: < ± 1 % F.S Transfer operating stroke: 85 mm Position repeat ability: ± 0.05 mm Operating speed: 0 ∼ 15 mm/sec with 10 step control Speed accuracy: ± 0.25 mm/sec Position sensor for feedback control: Incremental encoder Force detector for feedback control: Load cell sensing device Ejector: TYPE : Mechanical four points Ejector force: 2 Metric tons Ejector operating stroke: 3.25 ± 0.05 mm Protruding height difference: < ± 0.05 mm Maximum ejector stroke for mold protection: 3.8 mm Control: Control box: EMC Type Power supply main: AC200/220V ± 10 %, 3 Phase, 50/60Hz Control: AC200/220 ± 10 %, single phase, 50/60Hz Interface: Molding data * monitor data * error code: RS-422C Input signal: Direct input (ASM → SHI) DC24V, 24 ports Output signal: Direct output ( SHI → ASM ) DC24V, 16 ports Miscellaneous: Acoustics noise level: < 80 dBA Life time: > 2 x 10^6 Cycles 2011 vintage.
  • ASM: IDEALMOLD--MUF

    ASM IDEALmold--MUF Singulated transfer mold machine (4) Press modules, 120-ton Mold Chases: not included Product Related Parts (PRP): not included Hard disk/OS: not included Mold application software: not included 220/208V, 3ph, 50/60Hz, 100A Currently crated 2013 vintage.
  • ASM: MP209

    ASM MP209 SO300 Dambar Cut & Trim / Form & Singulation System.
  • ASM: IDEALMOLD 170T

    ASM IDEALmold 170T Molding system Type: Electro mechanical servo type With 4-pin toggle mechanism. Mold clamping force: 120 Metric tons max Force misalignment of 4 columns: < ± 5 % of Mean value Clamping force repeat ability: < ± 1 % F.S Clamping force absolute accuracy: ± 1 Metric Tons (Test report) Soft clamp capability: 155 x 50 x 0.1 mm Lower platen full stroke: 176 mm (Including 6mm ejection) Daylight: 646 mm Press daylight adjustment: No Minimum mold closing + lock time: 1.4 sec. for 5-165 stroke Minimum mold opening time: 1.4 sec. for 5-165 stroke Low speed closing: 1 mm/sec Low speed opening: 1 mm/sec Position repeat ability: ± 0.1 mm Parallelism of mold platen: < ± 0.05 mm Straightness of mold platen: < ± 0.03 mm Deformation of mold platens: < 0.0254 mm / 305 mm span Mass of lower mold and housing: 150 kg ( approx.) Feedback method: Incremental encoder on motor axis Transfer: Type: Electro mechanical low RAM movement Transfer force: 3 Metric tons max Transfer force accuracy: ± 50 kg Transfer force repeat ability: < ± 1 % F.S Transfer operating stroke: 85 mm Position repeat ability: ± 0.05 mm Operating speed: 0 ∼ 15 mm/sec with 10 step control Speed accuracy: ± 0.25 mm/sec Position sensor for feedback control: Incremental encoder Force detector for feedback control: Load cell sensing device Ejector: TYPE : Mechanical four points Ejector force: 2 Metric tons Ejector operating stroke: 3.25 ± 0.05 mm Protruding height difference: < ± 0.05 mm Maximum ejector stroke for mold protection: 3.8 mm Control: Control box: EMC Type Power supply main: AC200/220V ± 10 %, 3 Phase, 50/60Hz Control: AC200/220 ± 10 %, single phase, 50/60Hz Interface: Molding data * monitor data * error code: RS-422C Input signal: Direct input (ASM → SHI) DC24V, 24 ports Output signal: Direct output ( SHI → ASM ) DC24V, 16 ports Miscellaneous: Acoustics noise level: < 80 dBA Life time: > 2 x 10^6 Cycles 2011 vintage.
Show per page
1 2 3 4 5 6 Next